Analysis of Intraocular Lens Surface Properties With Atomic Force Microscopy

Abstract

PURPOSE:

To analyze the surface optics of 4 currently available intraocular lenses (IOLs) with atomic force microscopy.

SETTING:

Licryl Laboratory, University of Calabria, Rende, Italy.

METHODS:

The surface roughness and topography of poly(methyl methacrylate) (PMMA), silicone, hydrophobic, and hydrophilic acrylic IOLs were evaluated with atomic force microscopy in contact mode. The analysis was performed in a liquid environment using cantilevers with a 0.01 Newtonw/meter nominal elastic constant. Measurements were made over areas of 10 microm2 on different locations of the posterior optic surface of the IOL.

RESULTS:

Atomic force microscopy permitted high-resolution imaging of IOL optic surface characteristics. Surface topography showed different features with respect to the lens biomaterial. The root-mean-square roughness of the IOL optic surface was significantly different between lenses of various materials (P < .001). The hydrophobic acrylic and silicone IOLs had the lowest mean surface roughness, 3.8 nm +/- 0.2 (SD) and 4.0 +/- 0.5 nm, respectively, and the 2 PMMA IOLs had the highest mean surface roughness, 6.6 +/- 0.3 nm and 7.0 +/- 0.6 nm.

CONCLUSIONS:

Atomic force microscopy was effective and accurate in analyzing IOL optics. The surface topography of IOLs may vary with different manufacturing processes.